Dokumentation branch

Software/Software/Display

@@ -1 +0,0 @@
-Subproject commit 1bef531c22f24741f22ebdd14f54375706acd3bb

Software/Software/Sensor

@@ -1 +0,0 @@
-Subproject commit fd94fd7377ddd09f092ef974bcfe693c35198dfc

Software/Software/tig-stack

@@ -1 +0,0 @@
-Subproject commit dd773459da6ff296c5e8f849c6ac48848a6b234f

Worktree

@@ -1 +0,0 @@
-Subproject commit d940de8caa68d6364d0a810c285e9578c7a1f13c

readme.md

@@ -1,48 +0,0 @@
-#### WIND MESS ANLAGE BY NETWEBSYSTEMS® 
-##### BASIC INSTRUCTIONS FOR INSTALLATION FOR BEAGLEBONE
-
-###### 1. PREPARE BEAGLEBONE:
-*    1.1 INSTALL O.S.
-*    1.2 CONNECT THROUGH SSH (192.168.7.2)\
-       - SSH password: Netweb4ever!
-*    1.3 CONNECT TO WIFI
-*    1.4 USE IFCONFIG TO CHECK IP AND USE THIS IP TO ACCESS REMOTELY
-*    1.5 INSTALL 'minimalmodbus' and 'paho-mqtt' libraries WITH -H\
-        sudo -H pip3 install minimalmodbus paho-mqtt
-###### 2. PREPARE THE SENSOR:
-*    2.1 OPEN THIES DEVICE UTILITY
-*    2.2 LOG AS ADMIN KY04711, CS1
-*    2.3 CHANGE DUPLEX MODUS AND WIRING
-*    2.4 SET TIME ZONE (TZ26) AND DAILY TIME UPDATE(RT03)
-*    2.5 CHANGE TO MODBUS RTU INTERPRETER IN THE THIES DEVICE UTILITY
-*    2.6 CONNECT THE SENSOR TO THE BEAGLEBONE (BR & YE = A, GR & WH = B, GRAY = GND)
-###### 3. INSTALL THE SOFTWARE IN THE BEAGLEBONE
-*    3.1 CLONE THE GIT REPOSITORY\
-       $ git clone http://git.strawhat-solutions.de/NetWEB/Windmessanlage.git 
-*    3.2 CREATE THE WORKING DIRECTORY AND COPY FILES:
-*    3.3 EDIT THE CONFIG.INI FILE
-
-###### 4. SET SERVICE AUTO-START
-*    4.1 COPY SERVICE FILE INTO BEAGLE BONE SERVICE DIRECTORY\
-       $ sudo cp /var/lib/cloud9/Windmessanlage/Software/Sensor/wma.service /lib/systemd/ 
-*    4.2 CREATE A SYMLINK in the /etc/systemd/system/ directory \
-       $ sudo ln -s /lib/systemd/wma.service /etc/systemd/system/wma.service 
-*    4.3 RELOAD DAEMON, ENABLE AND START THE SERVICE
-
-###### 2. PREPARE DISPLAY:
-
-* 1.1 POWER UP DISPLAY\
-     Connect the +24 and GND Wires to power up the Display
-* 1.2 INSTALL 'pygame' and 'paho-mqtt' libraries WITH -H
-* 1.3 CREATE CHANGE TO THE WORKING DIRECTORY\
-    $ sudo mkdir /home/pi/WMA/\
-    $ cd /home/pi/WMA/
-* 2.2 CLONE THE GIT REPOSITORY
-* 2.3 EDIT THE CONFIG.INI FILE FOR THE APPLICATION\
-    $ sudo nano /home/pi/WMA/Windmessanlage/Display/config.ini 
-    
-###### 3. SET SERVICE AUTO-START
-
-* 3.1 COPY SERVICE FILE INTO BEAGLE BONE SERVICE DIRECTORY\
-    $ sudo cp /home/pi/WMA/Windmessanlage/Display/display.service /etc/systemd/system/display.service
-* 3.2 RELOAD DAEMON, ENABLE AND START THE SERVICE\